The CELTIC range can be used with all common non-corrosive industrial gas. As for regulation, these products are very accurate. APPLICATION First stage regulation for propane at the outlet of a cistern (RGCL-N) Pressure limiting device (AML1 with RD05) PRODUCT ADVANTAGES Watertightness in case of bad weather All components comfortably accessible Easy and fast dismantling Simple and heavy-duty Low pressure closing Stainless steel a
The CELTIC range can be used for all common non-corrosive industrial gas. As for regulation, these products are very accurate. APPLICATION Outlet pressure regulation at the outlet of an air gas vaporizer (JUNIOR 74 ES) First stage regulation for propane at the outlet of a cistern Pressure limiting device (JUNIOR 74 DUO) PRODUCT ADVANTAGES Watertightness in case of bad weather All components comfortably accessible Easy and fast disma
This regulator is designed for medium and low pressure. Thanks to their balanced valve, the PROTÉE are insensitive to the variations of the outlet pressure. They enable the distribution of all non-corrosive compressed gas (except oxygen: contact GCE). APPLICATION First stage regulation for a propane cistern Gas distribution of medium pressure Supply gas for burners in medium pressure Oven inert Gas supply for safety devices Pressu
The CELTIC range can be used for all common non-corrosive industrial gas. As for regulation, these products are very accurate. APPLICATION Second stage regulation to supply furnaces Inertness (cisterns, pipes) Pressure limiting device (AML2 with RD05 = "S") PRODUCT ADVANTAGES Watertightness in case of bad weather All components comfortably accessible Easy and fast dismantling Simple and heavy-duty Low closing pressure CELTIC AM
Regulator for medium and low pressure. Thanks to their balance valve the PROTÉE are insensitive to the variations of the outlet pressure. They enable the distribution of all non corrosive gas (except oxygen: contact GCE). APPLICATION Second stage regulation for a propane cistern Medium pressure network supply Medium pressure burner supply Oven inert Security network PRODUCT ADVANTAGES Watertightness in case of bad weather Al
Because some fluid in a network can be dangerous, GCE has developped an efficient security device that will act on the flow when the outlet pressure will be very high or very low. The GCE security device is used only with selected regulators of the range. The security valve cut the inlet gas flow, if the outlet pressure is out of the pressure slot that has been previously adjusted. TECHNICAL DATA Spring pressure slot: &nbs
UNISET are new outlet points in GCE’s proposal for industrial gases service. They were created using the long term experience with production of central gas supply systems. Variants for oxygen and fuel gases are equipped with three function flashback arrestors (FBA). There are two design types for shielding gases. The first consists of flow-gauge showing flow-rate adjusted by a pressure regulator. The second one is based on a flow-meter wit
A broad application spectrum through the 4-port configuration (type -01/-04) or 6-Port-configuration (type -03/-05), which can be delivered respectivly, with (type -04/-05) or without (type -01/-03) a relief valve. With type-03 and type-05 the use of contact gauge (accessories) in conjunction with alarm box (accessories) facilitates the monitoring of gas reserves. APPLICATION The LMD 320 reduces line pressure to give a lower supply pressure. Th
These gas supply panels are mounted onto a stainless steel panel and consist of a pressure regulator, inlet and outlet pressure gauges, a relief valve and shut-off valves (type -16 at the outlet, type -24 at the inlet, type -25 at inlet and outlet) for the process gas. A choice of stainless steel coils or flexible high pressure hoses is available for the connection to the gas cylinder. The use of contact gauge (accessories) in conjunction with al
SAVE GAS UP TO 30-35 % The device Pluscontrol GS35 must be applied to the outlet of all Argon or CO2 regulators of any brand. It solves the big problem of huge waste of gas when opening the torch solenoid valve, a few known.In that moment, in fact, the hose between the regulator and the solenoid valve remains full of gas at a high pressure due to previous stop of the flow (closing of the solenoid valve). As soon as you press the torch trigger (M