The MF-101 incorporates a large precision machined sensing element to control outlet pressures up to 35 bar from a maximum 100 bar inlet. The main valve is an unbalanced design to create positive shut off on gas or liquid applications against the PEEK seat. Lightweight compact design Piston sensing element High accuracy
Designed with precision machined sensing elements to allow fine pressure control on pressures up to 414 bar. Two piston sensors combined with two spring ranges, provide 4 outlet control options with a combination of low torque adjustment and excellent sensitivity. A self venting design and optional ratio loaded actuator makes it an ideal regulator for use with electro-pneumatic controllers for automated pressure control. FEATURES 690 bar / 10
The LF-301 provides a compact and economical solution for controlling pressures up to 180 bar on low flow applications.Ideal for first stage pressure let down where basic pressure control is required. A small piston sensing element allows low torque adjustment with a range of springs with fine pressure adjustment. FEATURES Compact design Economical 316SS Bonnet Max 300 bar inlet
The BP-LF690 is a back pressure regulator for gas or liquid applications suited for typical low flow applications to 10lpm (liquid), this accurate regulator controls inlet pressure and vents excess pressure back via the threaded ¼” NPT outlet port. FEATURES 690 bar/10000 psi inlet pressure Metal to metal seating for liquid and PEEK seating for Gas Precision machined sensing elements 3 Sensor ranges for combination of low torqu
FEATURES 316L SS Machined Wetted Parts Large sensitive elastomeric diaphragm 0,1 bar to 10 bar / 1,5 psi to 150 psi control range Minimal decaying inlet pressure effect For flow rates to 30Nm³/hr (@ max P2)
The BP-LF690 is a back pressure regulator for gas or liquid applications suited for typical low flow applications to xx (liquid), this accurate regulator controls inlet pressure and vents excess pressure back via the threaded ½” NPT outlet port. FEATURES 690 bar/10000 psi inlet pressure Metal to metal seating for liquid and PEEK seating for Gas Precision machined sensing elements 3 Sensor ranges for combination of low torque a
The BP-301 incorporates a highly sensitive piston to control pressures up to 70 bar with the lower Cv value of 0.1, and 35 bar with a higher Cv of 0.5. Both designs provide accurate back pressure control on liquid or gas applications. Unlike relief valves, the set load from the spring is not directly applied to the seating area, and the piston sensor provides accurate control throughout the control range. FEATURES Lightweight compact design
The TS-300 provides stable pressure control under decaying cylinder pressures. The first stage of the regulator is set to 35 bar to allow maximum flow capability through the regulator. SPECIAL FEATURES Metal to metal sealing diaphragm Sealing area protected and centralized within the body of the regulator 0,04 % decaying pressure effect ‘Interstage’ relief valve option
The BP-300 has been designed with a convoluted Inconel X750 diaphragm that lasts 50 % longer than a typical stainless steel designs. Its compact simple design makes it ideal for general purpose applications, where accurate control of upstream pressure is required. FEATURES Metal to metal diaphragm sealing Positive sealing against Viton seat Lightweight compact design Strong and sensitive diaphragm element High Accuracy
The BP-MF690 is a back pressure regulator for gas or liquid applications suited for typical low flow applications to xx lpm (liquid). The liquid version includes ceramic seating for ultimate protection against cavitation and erosion on aggressive application media such as water glycol and methanol. This accurate regulator controls inlet pressure and vents excess pressure back via the threaded ¾” NPT outlet port. FEATURES Inlet co