MEDIFLOW® ULTRA II
Group Number: 3324Whole medical range is available on
- Built-in regulator provides a very stable and precise flow, independent of the pressure in the medical central gas system or cylinder
- Innovative self centering flow setting device with continuous flow between settings. In the unlikely event of indent mechanism failure, the patient will still be supplied by medicinal gas.
- Lateral and frontal reading of flow settings
- 360° swivelling outlet – it enables better orientation of the nasal cannula or oxygen mask towards the patient (preventing from twisting)
- Higher number of flow disc holes increases treatment options. Extra flow setting of 25 l/min on the traditional 15 l/min variant, allows use in resuscitation. The additional 7 l/min is intended for nebulization.
- Ergonomic and streamlined design
735100000411 MediFlow Ultra II leaflet EN
TECHNICAL DATA
| Inlet pressure range: | 2,8 – 8 bar |
| Max.outlet pressure: | 2,1 bar (without flow) |
| Flow ranges*: | |
| 0 to 2 l/min: | 0 / 0,1/ 0,2 / 0,3 / 0,4 / 0,5 / 0,6 / 0,7 / 0,8 -/ 1 / 1,5 / 2 |
| 0 to 6 l/min: | 0 / 0,25 / 0,5 / 0,75 / 1 / 1,5 / 2 / 2,5 / 3 / 4 / 5 / 6 |
| 0 to 25 l/min: | 0 / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 9 / 12 / 15 / 25 |
| Inlet connection: | According to national standards |
| Outlet connection: | 9/16 UNF; M12×1,25; G3/8; G1/4 with hose nipple |
| Body material: | Nickel-plated brass |
| Control knob: | Polyamide |
| O-rings: | EPDM |
| Filter: | Sintered bronze and stainless steel |
| Body dimensions: | |
| Diameter: | 39 mm |
| Length: | 77 mm |
| Weight: | 350 g |
| Regulatory status: | Complies with Medical Devices Directive 93/42/EEC Complies with EN 10524-4 (Low pressure regulators) Complies with Standard EN 1789 (Medical vehicles and their equipment) |
* Flowrates expressed at 23°C and 101,3 kPa
Related Products
Top
