GCE Krass NM250
CUTTING TORCH
GCE KRASS NM250 cutter employs the nozzle mix principle, in which the combustible gas mixing is confined to the cutting nozzle.
This results in a cutter which is highly resistant to backfire and flashback.
- Special designed handle for comfortable holding, operation and lightweight.
- The position of the lever gives ease and comfort of operation.
- A wide range of nozzles for a better cutting performance is available.
735100001567 GCE Krass NM250 leaflet EN
TECHNICAL DATA
| Hose connections: | G3/8” - G3/8” LH |
| Cutting capacity: | 250 mm (10”) |
| Cutting nozzles: | ANM/ANME (Acetylene) Cutting Nozzles PNM/PNME (Propane) Cutting Nozzles HA311-1 sheet metal nozzles AGNM Gouging nozzles |
| Gas: | Acetylene or Propane |
ORDERING INFORMATION
| Art. Nr | Description | Head Angles | Weight |
| 0870799KR | 505 mm (20”) | 90° | 0.75 kg |
COMPATIBLE CUTTING NOZZLES-3-CONE (NOZZLE MIX)
PNME: PROPANE
| Art. Nr. | Thickness (mm) |
Pressure Oxygen (bar) |
Pressure f. gas (bar) |
Flow rate Oxygen (m3/h) |
Flow rate f. gas (m3/h) |
| 0769494 | 3 - 10 | 2 | 0,3 | 2,1 | 0,3 |
| 0769495 | 10 - 25 | 3 | 0,3 | 3,2 | 0,4 |
| 0769496 | 25 - 40 | 3 | 0,3 | 5,3 | 0,6 |
| 0769497 | 40 - 60 | 3,5 | 0,3 | 7,4 | 0,8 |
| 0769498 | 60 - 150 | 3,5 | 0,3 | 13,6 | 1,0 |
ANME: PROPANE
| Art. Nr. | Thickness (mm) |
Pressure Oxygen (bar) |
Pressure f. gas (bar) |
Flow rate Oxygen (m3/h) |
Flow rate f. gas (m3/h) |
| 0768670 | 3 - 10 | 2,5 - 3,5 | 0,3 | 1,25 - 1,65 | 0,3 |
| 0768635 | 10 - 25 | 3,0 - 4,0 | 0,3 | 2,12 - 3,20 | 0,4 |
| 0768599 | 25 - 40 | 3,5 - 4,5 | 0,3 | 3,20 - 4,45 | 0,45 |
| 0768636 | 40 - 60 | 4,5 - 5,0 | 0,5 | 4,50 - 5,50 | 0,5 |
| 0768662 | 60 - 100 | 4,5 - 5,5 | 0,5 | 8,40 - 9,80 | 0,6 |
| 0768598 | 100 - 200 | 5,0 - 6,5 | 0,5 | 13,0 - 15,0 | 0,75 |
